Excello Products Company XC2800 用户手册
9 - ENG
A20118
5. Connect wand to gun. Tighten
securely.
6. Attach high pressure hose to
gun. Tighten se cure ly.
NOTE: The high pressure pump was
fi lled with oil at the factory. There is no
need to add oil at this time, see the
Maintenance section of this manual
for Maintenance information.
7. Roll the unit off the carton and
fi lled with oil at the factory. There is no
need to add oil at this time, see the
Maintenance section of this manual
for Maintenance information.
7. Roll the unit off the carton and
discard carton.
Risk of bursting.
Use a tire pressure
Use a tire pressure
gauge to check the tires pressure
before each use and while inflating
tires; see the tire sidewall for the
correct tire pressure.
NOTE: Air tanks, compressors and
similar equipment used to infl ate tires
can fi ll small tires similar to these very
rapidly. Adjust pressure regulator on
air supply to no more than the rating
of the tire pressure. Add air in small
increments and frequently use the tire
gauge to prevent over infl ation.
before each use and while inflating
tires; see the tire sidewall for the
correct tire pressure.
NOTE: Air tanks, compressors and
similar equipment used to infl ate tires
can fi ll small tires similar to these very
rapidly. Adjust pressure regulator on
air supply to no more than the rating
of the tire pressure. Add air in small
increments and frequently use the tire
gauge to prevent over infl ation.