Exabyte MAGNUM 1X7 LTO 用户手册

1012581

6.

6.

6.

6.

Power on the host computer system.

After the autoloader powers on, the LCD displays the Home screen. As shown 

in the example below, the first line of the Home screen displays the product 

name and the second line shows status for the autoloader and tape drive.

If the autoloader powered on as described, continue with configuration in 

If the autoloader did not power on as described, check the following:



Is the power switch on?



Is the power cord inserted correctly?



Is the SCSI bus terminated?



Are the devices on the SCSI bus attached to the autoloader all LVD?



Is the SCSI cable firmly connected to the autoloader and host computer or 

other devices on the bus?



Is the host computer system turned on?



Is there an error message displayed on the autoloader’s LCD? (see 

 for descriptions of LCD error messages.)



For additional tips, see 

! 

! ! 

! 

Do not power on the host computer system immediately after 

powering on the autoloader. After you press the autoloader’s 

power switch, there is a short delay before the tape drive is 

on-line.

L T O

1x7

2 U

Ultrium 3-S

D217