Exabyte MAGNUM 1X7 LTO 用户手册

1012581

This section provides step-by-step instructions for setting autoloader 

configuration options. The instructions assume that you are using the operator 

panel to set options. If you are using the SCSI autoloader’s Remote 

Management utility (described in 

), the selections are generally the 

same but you access menus and selections through web-style links and fields.

 provides an overview of each configuration option. Read through 

the table to determine which options you need to set, then follow the steps on 

the referenced pages.

LCD Language

You can change the language for the LCD display from 

its default (English) to French, German, Spanish, Italian, 

or Portuguese.

LCD Contrast

You can set the LCD’s contrast to an appropriate level 

for your lighting conditions.

Autoloader SCSI ID
Tape Drive SCSI ID

The SCSI autoloader and tape drive must have separate 

SCSI IDs. You can view the default settings and change 

them if necessary.

Emulation Mode

Changing the emulation mode is required if your 

backup application does not support the Magnum 1x7 

LTO Autoloader, but does support one of these 

products:
ƒ

VXA AutoPak 1x10 autoloader

ƒ

Exabyte EZ17 autoloader

ƒ

Exabyte 210 library

Cleaning Cell
Autoclean

These options allow you to set up automatic tape drive 

cleaning.

To use automatic cleaning, a cleaning cartridge 

must be installed in the autoloader (see 

).

DHCP Addressing
IP Address
Subnet Mask
Gateway Address

If you are using the autoloader’s Ethernet interface, you 

can set the autoloader’s IP address, subnet mask, and 

gateway address for communication across your 

Ethernet network. You can also choose whether the 

autoloader uses a fixed IP address (static addressing) or 

an address assigned by a DHCP server.