Exabyte MAGNUM 1X7 LTO 用户手册

1012581

Normally, the empty cell closest to the tape drive is the same cell in 

which the cartridge was originally stored. If desired, you can unload a 

cartridge to different empty cell, if one is available.

6.

6.

6.

6.

Press 

 to start the unload operation (or 

 to cancel the operation). 

When the tape drive ejects the cartridge, the autoloader places the cartridge 

in the specified cell. A series of status messages appears during the 

operation, followed by the Command menu when the operation is 

complete.

7.

7.

7.

7.

Press 

 (as needed) to return to the Home screen.

Under normal operating conditions, the LTO Ultrium tape drive in the 

autoloader does not require regular cleaning. The tape drive contains an 

automatic cleaning mechanism that allows it to clean itself as necessary. 

Occasionally, the tape drive may require cleaning with a cleaning cartridge. 

The tape drive monitors its cleaning needs internally and notifies the 

autoloader when it requires cleaning. When cleaning is required, the 

autoloader displays a cleaning message on the Status screen.

Do not use any cleaning method other than the LTO Cleaning Cartridge (or a 

cleaning cartridge approved by Exabyte for use with LTO drives). Using other 

cleaning methods will void your warranty.
Carefully follow all instructions and recommendations provided with the cleaning 

cartridge. Do not rewind and reuse the material in a cleaning cartridge. Reusing 

the material may redistribute contaminants previously removed from the tape 

path. If all of the cleaning material has been used, discard the cartridge and use a 

new cleaning cartridge.