Gaggenau BX 480/481 610 用户手册

The appliance is in the standby mode when no 
function is set or the child lock is activated.

The control panel's brightness is reduced in the 
standby mode.

‒

There are various displays for the standby mode. 
The GAGGENAU logo and the time are set by 
default. Refer to the section entitled 

 if you would like to change the display.

‒

The display's brightness depends on the vertical 
viewing angle. You can adjust the display by way 
of the "Brightness" setting on the factory settings.

In order to exit standby mode, you can either

▯

Set the function selector,

▯

Touch a control panel,

▯

or open or close the door.

Now you can set the desired function. Read the 
appropriate chapters to learn how to set functions.

‒

If "Standby display = off" is selected in the factory 
setting, you must turn the function selector to exit 
the standby mode.

‒

The standby display appears again if you have not 
made any settings for a long while after activation.

‒

The cooking compartment lighting goes out after 
a little while if the door is open.

The cooking compartment has five shelf levels.

9

Do not place anything on the cooking 
compartment floor. Do not cover it with 
aluminium foil. A build-up of heat could damage 
the appliance or cause injury.

9

Do not slide any accessories between the shelf 
positions, or they may tip.

The accessories feature a latching function. The 
latching function prevents tilting of accessories when 
pulling them out. You must insert accessories in the 
oven interior correctly so that tilt protection will work.

When inserting the rack, make sure

▯

that the engaging lug (a) points downward

▯

that the rack's safety clip is at the rear and top.








D

D