Everpure 2001 用户手册

下载
页码 60
SUPREMA 2001 - OPERATION & SERVICE MANUAL 
Suprema 2001 - Operation & Service 
July 6, 2001 
Page 25 of 60 
 
SETTING NUMBER OF CHOCOLATE PUMP CYCLES 
 
This feature will allow you to program the number of chocolate pump cycles for any 
cup size. The unit is preset to the following from the factory: 
 
CUP SIZE 
HOT CHOCOLATE 
CAFE MOCHA 
Small - 6 oz. 
2 cycles 
1 cycle 
Medium - 8 oz. 
2 cycles 
1 cycle 
Large - 10 oz. 
3 cycles 
2 cycles 
 
 
1.  To set the number of chocolate pump cycles for each cup, press the "
UP
button on the hidden menu scroll buttons until the following message 
appears, 
 
 
 
 
 
a)  Press the "
START
" button to enter the set mode. 
 
b)  Select the cup size and product to be programmed on the front selection 
panel. 
 
c)  Using the hidden setting adjustment buttons, increase or decrease the 
number of pump cycles. Maximum is 8 for hot chocolate and 3 for café  
mocha. 
 
d)  To set, press either one of the two hidden menu scroll buttons. 
 
 
 
SETTING THE DOUBLE-CUP 
 
Any one of the three cup sizes can be programmed to dispense a double-cup (two 
consecutive cups) of coffee or cafe mocha using this feature. For example, if you would 
like to brew a 20-oz. cup of coffee, it is possible to set a 10-oz. large cup to brew a 
double-cup. 
 
 
1.  To program a cup to be a double-cup, press the "
UP
" button on the hidden 
menu scroll buttons until the following message appears, 
 
 
 
 
 
 
a)  Press the "
START
" button to enter the set mode. 
 
b)  On the front selection panel, press the cup size that needs to be 
programmed to become a double-cup. The LED that corresponds to that 
cup size will illuminate as an indication that it has been programmed as a 
double-cup. 
 
c)  To program back to single cup, repeat the above procedure. Pressing the 
cup size will switch the LED off, which indicates the double-cup feature 
is disabled for that cup size. 
 
Please note that if the carafe feature is enabled, it overrides the double-cup feature if 
the double-cup is set for the large cup (this does not apply is double-cup is set on the 
small or medium cup). 
CHOCO PUMP 
PRESS <START>
 
DOUBLE-CUP 
PRESS <START>
 
!
Note:
    
If the number of 
CAFE MOCHA
” 
pump cycles has 
been changed for 
a particular cup 
size, it is 
necessary to enter 
the “
SET
-
UP
” mode 
to adjust the 
product and water 
levels for that cup 
size.
 
!
Note:
    
Once a cup size is 
programmed to 
brew a double-
cup, it will no 
longer brew a 
single cup.
 
!
Note:
    
The double-cup 
feature is not 
available for hot 
chocolate. For hot 
chocolate, 
increase the 
number of 
chocolate pump 
cycles.