Everpure 2001 用户手册

Suprema 2001 - Operation & Service 

July 6, 2001 

Page 7 of 60 

 

a)  Peel the backing paper from the rear of the fascia (Figure 3). 

b)  Align the fascia inside the plastic trim around the selection panel, making 

certain that the fascia does not interfere with the buttons. 

c)  Once aligned, press the fascia firmly in place (Figure 4). 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

a)  Open the outer door. 

b)  Peel off the lower half of the backing 

paper. 

c)  Align the upper half of the decal with the 

right side of the inner door. 

d)  When satisfied with the alignment, apply 

the lower portion of the decal to the door 
surface. 

e)  Lift the upper portion of the decal and 

remove the backing paper. 

f)  Apply pressure to the upper half of the 

decal, from the center outwards. 

 

a)  Peel the backing from the decal. 

b)  Align the decal below the inner door 

grounds deflector. 

c)  When satisfied with the alignment, apply 

pressure to the decal. 

 

!