Eventide DJ Equipment H8000 用户手册
Here are important details you should know:
Routing
The correct routing of the inputs and outputs channels is very important when working with these
presets. When using a 5.1 I/O structure, please always refer to the following input and output
assignments:
The correct routing of the inputs and outputs channels is very important when working with these
presets. When using a 5.1 I/O structure, please always refer to the following input and output
assignments:
I/O 5.1 standard configuration
Input 1 > Front LEFT Channel
Input 2 > Front RIGHT Channel
Input 3 > Front CENTER Channel
Input 4 > LFE (sub) Channel
Input 5 > Surround (rear) LEFT Channel
Input 6 > Surround (rear) RIGHT Channel
Input 2 > Front RIGHT Channel
Input 3 > Front CENTER Channel
Input 4 > LFE (sub) Channel
Input 5 > Surround (rear) LEFT Channel
Input 6 > Surround (rear) RIGHT Channel
Be sure that the H8000 inputs & outputs are connected to hardware inputs and outputs in this way.
Input Trim
A channel dedicated input level, this Trim helps take control on very hot incoming signals. Use the
H8000 meter LEDs to monitor audio and use these trimmers accordingly.
A channel dedicated input level, this Trim helps take control on very hot incoming signals. Use the
H8000 meter LEDs to monitor audio and use these trimmers accordingly.
Phantom Speaker
Available in the full 5.1 I/O algorithms only, this switch enables the traditional stereo “phantom
speaker” by removing the center channel from the center speaker, redirecting it to the front left and
right speakers. When set to OFF, you will listen to a full 5.1 mix; if set to ON, the resulting 4.1 is what
you’ll get, with stereo placement of the center channel audio source in the front left & right speakers.
Available in the full 5.1 I/O algorithms only, this switch enables the traditional stereo “phantom
speaker” by removing the center channel from the center speaker, redirecting it to the front left and
right speakers. When set to OFF, you will listen to a full 5.1 mix; if set to ON, the resulting 4.1 is what
you’ll get, with stereo placement of the center channel audio source in the front left & right speakers.
Gain
This is a very useful level gain, placed at the end of the algorithm. Use it to push the output level or to
recover level loss caused by necessary severe input trim or by low level input. Up to 12dB is
provided here.
This is a very useful level gain, placed at the end of the algorithm. Use it to push the output level or to
recover level loss caused by necessary severe input trim or by low level input. Up to 12dB is
provided here.
Control Switches
Each channel has an output switch. Here you can set it ON or OFF, for convenient testing & monitoring
tasks.
Each channel has an output switch. Here you can set it ON or OFF, for convenient testing & monitoring
tasks.
Size
This is a very important parameter. It controls a great numbers of other parameters ! ! !
Its main function is to scale Diffuser’s delay times, which are always hidden to the user. We have set
and tweaked their values to what we consider generally useful values. You can find access to them if
you desire to get into deeper programming, using our VSIGFILE Windows PC Graphical Editor.
This is a very important parameter. It controls a great numbers of other parameters ! ! !
Its main function is to scale Diffuser’s delay times, which are always hidden to the user. We have set
and tweaked their values to what we consider generally useful values. You can find access to them if
you desire to get into deeper programming, using our VSIGFILE Windows PC Graphical Editor.
The H8000 Presets Collection
Release 1.2
Page 108 of 109
12/30/2003