Ericsson Multi-Format Receiver RX1290 用户手册

 

Operating the Equipment Locally

 

3.5 

Setting Up Preset Services (Menu 1) 

This group allows up to 40 Services to be stored as presets. Selecting a Service 
from the preset list in Menu 1 automatically reconfigures the Multi-Format Receiver 
to receive that Service with its associated parameters set as stored. 

Follow the steps in Table 3.5 to store the current Service as a preset. 

1 

Use the menus to set-up the unit 
so that the required Service is 
current.  
(Refer to Section 3.7, Service 
Configuration (Menu 3)). 

This selects the Service and associated 
parameters for the preset process. 

2 

Go to Menu 1 to view the Preset 
menu. 
 

This displays the menu which allows the 
Current Service to be stored at a chosen 
location (01 – 40). If there is no Current 
Service, the menu display reads NO STORED 
SERVICE. 

3 

Select a location to store the 
preset. The Edit mode cannot 
be entered unless a valid 
Service being decoded. 

Use Edit and the arrow pushbuttons to step 
through the stored items. This allows a specific 
location to be chosen. Any vacant locations 
are marked by NO STORED SERVICE. 

4 Press 

Save. 

This stores the current Service and its 
associated parameters as a preset in the 
selected location. This adds the Service to the 
list displayed on page 1. 

EN/LZT 790 0003/2 R1A

 

 

 

 

3-9