Energizer Air Quality Computer 用户手册

 

3

Press “MENU” key to turn unit on.  Unit will automatically turn off after 
2 minutes if no keys have been pressed. 

The PerformAIRE 

By ALTRONICS 

O2 EQUIPPED 

VERSION 6.* 

 
"O2 EQUIPPED" will only appear if the unit was purchased with an 
oxygen sensor. 

DATA BASE #1 

ET MODE Selected 

Multiple Run Prediction 

Wind Prediction Enabled 

 

Second greeting message above will show the following info about the 
“Setup” of the unit: Data base, prediction mode, prediction type, and 
wind effect. 

1.  Place 

PerformBJSF in an area that will constantly expose it to the 

air you will be racing in (out side of trailer). 
2.  Do not place your hand or any other object near the air vent or black 
probe while 

PerformBJSF is in use. 

3.  Keep 

PerformBJSF out of direct sunlight. 

4.  Do not place 

PerformBJSF near soil or grass as it may pick up 

additional humidity. 
5.  Even though the 

PerformBJSF's sensors can stabilize very quickly, 

residual heat left in the enclosure when the 

PerformBJSF is moved 

from one environment to another may take more time to dissipate.   
 
Example: When you arrive at the track and take the 

PerformBJSF out 

of your 70-degree transporting vehicle and put it in the 90 degree outside 
air, you must let it sit for fifteen minutes before taking a reading. During 
this time the 

PerformBJSF enclosure and black probe will stabilize 

with the environment and allow it to take extremely accurate readings for 
the rest of the day.  Allow time appropriately for differences in