Elsa Cable 用户手册
Appendix
ELSA MicroLink Cable
63
Appendix
Technical data
Technical data
ELSA MicroLink Cable
LAN interface
Ethernet IEEE 802.3, 10Base-T (Twisted Pair, RJ45, Node/Hub switch)
Cable TV interface
MCNS DOCSIS (ITU-T J.112, physical layer as per Annex A & Annex B, MAC as per Annex B)
Socket:
F –socket (IEC169-2 connection via included adapter)
Reception frequency band:
88 - 860 MHz
Reception channel width:
6 MHz or 8 MHz
Receiver level:
48 W – 78 dBµV
Receiver modulation:
64QAM, 256QAM
Receiver data rate:
30.34 Mbps (64QAM), 42.88 Mbps (256QAM)
S/N ratio in receive direction:
> 21 dB (64 QAM)
> 28 dB (256 QAM)
> 28 dB (256 QAM)
Transmission frequency band:
5 – 42 MHz (5 – 65 MHz optional)
Transmission channel width:
200 – 3200 kHz
Transmission level:
85 – 122 dBµV
Transmission modulation:
QPSK, 16QAM
Transmission data rate:
0,32 – 5,12 Mbps (QPSK), 0,64 – 10,24 Mbps (16QAM)
S/N ratio in transmit direction:
> 14 dB (Burst QPSK)
> 20 dB (Burst 16QAM)
> 20 dB (Burst 16QAM)
Network protocols
Bridge mode:
Bridging of all IEEE 802.3-based protocols
IP router:
IP, TCP, ICMP, ARP, RIP-1, RIP-2, PROXY ARP, DHCP
Filter possibilities
Bridge mode:
Broadcast, multicast, destination MAC address,
source MAC address, automatic filtering of local and
remote stations
source MAC address, automatic filtering of local and
remote stations
IP router
TCP, UDP port filtering, source and destination net-
work filter
work filter
IP masquerading
(NAT/PAT)
(NAT/PAT)
Internet access using a single IP address via IP address and port implementation, static/
dynamic IP address assignment via DHCP, masking of TCP, UDP, ICMP and FTP; DNS forward-
ing; inverse masquerading for intranet IP services
dynamic IP address assignment via DHCP, masking of TCP, UDP, ICMP and FTP; DNS forward-
ing; inverse masquerading for intranet IP services
Management
Cable network operator:
Via SNMP and TFTP (transfer of configuration files and
firmware updates)
firmware updates)
User:
Via the cable TV network or LAN with TCP/IP, pass-
word protection, ELSA LANconfig, SNMP, TFTP, telnet
word protection, ELSA LANconfig, SNMP, TFTP, telnet
Display/operation
LEDs for LAN and cable TV network status, factory-default button, reset button
Power supply
12 V AC with AC adapter for 230 V (US version: 110V), 10 VA
Ambient conditions
Temperature: 5 - 40°C, humidity: 0 - 80%, non-condensing
Dimensions and
design
design
Rugged metal case, LEDs on front panel, connections on rear panel;
Dimensions: 158 x 32 x 135 mm (W x H x D)
Dimensions: 158 x 32 x 135 mm (W x H x D)