EDGE Tech GM Duramax 20200 用户手册

下载
页码 14
GM LB7 EZ Manual                                                                    Edge Products, LLC 
 
9
 
Using the Power Edge LB7 EZ 
 
Adjusting Power Levels 
The EZ has three power levels.  The EZ module was designed to allow the user 
to select any of the three power levels on the fly with the supplied three position 
switch.  Level 3 is with the switch towards the tab. 
 
 
Power Level Confirmation 
To confirm the power level that you have selected with your switch, you can do 
the following procedure: 
  
1.  Place gear selector in Park with your foot off of the accelerator while 
engine is idling 
2.  Set the Parking Brake 
3.  Place gear selector to reverse, neutral, reverse, then back to park. P-R-N-
R-P 
4.  The engine will rev to coincide with the power level selected, revving 3 
times for level 3 and so on 
 
Towing 
It is recommended that you use the Tow/Haul transmission mode while towing. 
This provides torque converter lockup in gears 2-5, which reduces transmission 
heat and also raises the shift rpm threshold to keep the rpm’s higher.  It is 
recommended that you maintain engine rpm above 1800 while towing. 
While towing, the EZ module allows the engine to pull many grades in the mid 
rpm’s rather than having to downshift and pull them in the high rpm’s.  This 
provides for lower EGT (Exhaust Gas Temperature) with the same power 
output.  EGT rises significantly with rpm--especially above 2500.  It is highly 
recommended that you install an EGT gauge while using the Power Edge EZ.   
 
It is recommended while towing you use power levels 1 or 
2 due to EGT and transmission stress