E-Tech STYLUS Pro WT7900 用户手册

Using Film and Other Media

Customizing the Settings for Your Paper

When you choose a media type in your Epson printer software, the driver
automatically determines the best settings for your paper. However, you may
want to fine-tune how the printer handles various media—especially if you
use non-Epson paper or a paper not supported by the driver. Use the paper
configuration settings described below.

You can create a group of settings for each paper type (up to ten types) and
select the settings whenever you print on a particular stock.

Creating Custom Paper Settings

To create settings a specific paper type, make sure the paper you want to use
is loaded in the printer. Then follow these steps:

1. Press r

, then press u or d to select

PAPER SETUP

2. Press r, then press d to select

CUSTOM PAPER

3. Press r, then press d or u to select a number (1 to 10). Press r to save

the number setting.

4. Press d or u to select

PAPER TYPE

, then press r. Press d or u to

select a media type, then press r. Press

to save it.

5. Press l twice to go back to the previous menu.

6. Press d or u to select

PLATEN GAP

, then press r. Press the d button

to select

NARROW

STANDARD

WIDE

, or

WIDER

. The

STANDARD

setting is recommended for most paper types. Press

to save the

setting, then press l to go back to the previous menu.

7. Press d or u to select

THICKNESS PATTERN,

then press r. Press

to print the paper thickness pattern. A pattern similar to the following is
printed:

Note: Paper
configurations are needed
only for non-Epson media.

Note: You can also create
paper configurations using
the Epson LFP Remote
Panel installed from the
printer software CD.

Smallest gap