Cyclades PM IPDU 用户手册
24
Cyclades PM IPDU Installer/Administrator/User Guide
Initial Configuration Using the Command Prompt
To configure the PM IPDU, you must have a work station connected to the console (In) port on the
PM IPDU and be logged in as the admin user. See Making a Direct Connection for Console Access
on page 20 for instructions on connecting to the console. If needed, refer to Chapter 4 beginning on
page 31.
PM IPDU and be logged in as the admin user. See Making a Direct Connection for Console Access
on page 20 for instructions on connecting to the console. If needed, refer to Chapter 4 beginning on
page 31.
To change the default password:
If the default pm8 password is still in use, change the admin password.
NOTE: Changing the default password closes a security hole that could be easily exploited.
1.
Log in to the PM IPDU.
2.
Enter the factory default username/password
admin/pm8
. A maximum of eight characters (not
case sensitive) is allowed.
3.
Enter the
passwd
command.
4.
Enter a new password when prompted.
To create users with the adduser command:
1.
Login to the PM IPDU.
2.
Enter the
adduser
command followed by the new username.
3.
Enter the password when prompted.
To assign outlets to users with the assign command:
1.
Login to the PM IPDU.
2.
Enter the
assign
command followed by the outlet number(s) and username.
Example:
To name the outlets with the name command:
1.
Login to the PM IPDU.
2.
Enter the
name
command followed by the outlet number and desired name of the outlet.
Example:
pm>assign 2 jane
Outlet 2 assigned to jane.
pm>name 2 chispa
2: Outlet now named chispa