Cuisinart PRIVATE RESERVE CWC-3200 用户手册

5

The purpose of the water tray is to receive the 

condensation drained from the interior. The 

collected water will evaporate so there is no 

need to remove the water manually. 

To install the water tray, simply slide it in from 

the rear of the cellar along the track, which is 

located beneath the cabinet body. 

When initially turned on, the LED will show the 

default setting at 55˚F. Your wine cellar has an 

electronic temperature control on the front of 

the unit. You can set the temperature of your 

wine cellar at any setting from 39˚ to 68˚F. The 

LED will then display the set temperature.

lower temperature than red wine.
By pressing the (+) temperature button on the 

display you can increase the temperature; 

pressing the (-) temperature button will lower 

the temperature. 
Please note that the actual cabinet temperature 

in a thermal electric unit is dependent on the 

ambient temperature. You may set the cabinet 

temperature within range but the unit may not 

reach that temperature.
For this model, when the ambient temperature 

is 77˚F, the lowest temperature that can be 

reached is 50-5˚F. When ambient temperature 

is 66˚, the cabinet temperature can reach 

approximately 39-41˚F.

Your wine cellar also has a light for your 

viewing pleasure. The interior display light 

option allows you to showcase your personal 

collection of wines. To activate this feature, 

press the Light button. This button is located on 

the control panel (see below). The interior light 

will remain on permanently until light button is 

pressed again. Under normal operation it is 

best for the light to remain off.