Fujifilm FinePix REAL 3D V1 用户手册

Pictures can be copied to internal memory from compatible devices when the viewer is 
in single-image display mode.  The viewer will automatically receive pictures transferred 
from the device; no other operation is required.

  Place the viewer about 5 to 20 cm (2 to 8 in.) from the 

other device with the infrared ports pointing directly 
at each other.  The ports should be at no more than a 
15 ° angle.

  Transmit pictures from the other device (see the manu-

al supplied with the device for details).  The viewer will 
display a message stating that it is receiving data via 
infrared and pictures will be displayed in the viewer as 
they are received.

3 Caution
If no pictures are received, make sure that there are no obstacles between the two devices and 
that the infrared ports are correctly aligned and are not in direct sunlight or directly under a fl uo-
rescent light.  Remote controls and other infrared devices and equipment that generates electri-
cal noise may interfere with transmission.

If  DISP. & SAVE  is  selected  for  IR COMMUNICATION in the 
setup menu (pg. 22), transferred pictures will automatically be 
saved in internal memory after being displayed in the viewer.