Force10 Networks S2410s 用户手册

snmp-server enable traps stpmode

SFTOS Command Reference for the S2410, Version 2.4.1.0

101

snmp-server enable traps stpmode

This command enables the sending of new root traps and topology change notification traps.

[no] snmp-server enable traps stpmode

The 

no

 version of this command disables the sending of new root traps and topology change 

notification traps.

enabled

Global Config

snmp-server enable trap violation

This command enables the sending of new violation traps designating when a packet with a 
disallowed MAC address is received on a locked port.

[no] snmp-server enable trap violation

The 

no

 version of this command disables the sending of new violation traps.

Disabled

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# 
prompt, such as (conf-if-range-vlan 10-20)#.

snmp-server traps enable

This command enables the Authentication traps.

[no] snmp-server traps enable

The 

no

 version of this command disables the Authentication traps.

enabled

Global Config

Version 2.3

Added Interface Range mode.

Defines an interface range and accesses the Interface Range mode

Identifies an interface and enters the Interface Config mode.