Force10 Networks S2410s 用户手册
108
System Configuration Commands
interface
interface
This command accesses the Interface Config mode for a designated logical or physical
interface. The Interface Config mode provides access to configuration commands for the
specified interface.
interface. The Interface Config mode provides access to configuration commands for the
specified interface.
Syntax
interface unit/slot/port
The
unit/slot/port
is a valid physical or logical port number. Physical ports are numbered
#/0/1 through #/0/50. In contrast, logical port numbers contain a number in the slot position
and are defined by the system. The number in the slot position is a 1 when you create a LAG
(port channel).
and are defined by the system. The number in the slot position is a 1 when you create a LAG
(port channel).
The
no
version of this command deletes the selected logical port.
Default
None
Mode
Global Config
interface range
This command groups a set of individual interfaces, a range of interfaces, or more than one
range of interfaces, to which subsequent configuration commands can be applied (bulk
configuration).
range of interfaces, to which subsequent configuration commands can be applied (bulk
configuration).
Syntax
interface range
{
ethernet
range,range
,... |
port-channel
range,range,...
|
vlan
range,range,
...}
Related
Commands
Configure a password for the enable command.
Use this command to access the Global Config mode from the Exec
Privilege mode.
Privilege mode.
Related
Commands
Groups a set of individual interfaces, a range of interfaces, or more than one
range of interfaces, to which subsequent configuration commands can be
applied (bulk configuration)
range of interfaces, to which subsequent configuration commands can be
applied (bulk configuration)
Creates a new VLAN and accesses the Interface VLAN mode for it, or
selects an existing VLAN and accesses the Interface VLAN mode for it.
selects an existing VLAN and accesses the Interface VLAN mode for it.