Fairchild CAM/CMOS-2K.LS 用户手册

 

When trouble shooting, you want to start the process with the obvious components contained 
within your system: 

•  Computer system: hardware & software 
•  Is the frame grabber plugged into the correct slot on the mother board 
•  Are all electrical connections secure 
•  Check to make sure that your light source is fully functional 
•  Make sure that the pin configurations for all of your cables are correct 
•  Make sure you have selected the correct lense for your camera 

 

 

In the Camera Control function, verify that the camera returns the control screen.  Verify that you 
can set various operating parameters. 

 

 

 

Before you call for support, be sure to make a note of the camera settings and the frame grabber 
settings you are using.  You should also have saved captured live images.  Customer support will 
frequently request that you e-mail copies of these captured images.  See Section 7. 

Double check the pin outs of your cable.  Make sure that the connections to the back of the camera 
and to your PC are secure. 

Make sure and measure that you have 5.0 volts at the camera connector. 

Check your power supply voltage output(s).  Check also the noise and ripple specification of your 
power supply and measure both at the power supply output. 

Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manual • Rev C• 33 of 42