Carrier Access Network Device Axxius 800 用户手册
5-28
Axxius 800 - Release 2.2
CLI Commands
add
add (router-wan) static
Use the add (router-wan) static commands to add static elements on the specified WAN
interface.
interface.
add (router-wan) static ip address
Use the add (router-wan) static ip address command to add a static IP address to the table
of learned addresses on the specified WAN interface. This command is typically used in
bridging.
of learned addresses on the specified WAN interface. This command is typically used in
bridging.
Syntax:
add {rtr_card-addr} {"wan-name"} static ip address
{"name"} {ip-addr}
Example:
add 3 "LosAngeles" static ip address "Pasadena"
195.168.201.140
The example will add a static IP address, 192.168.201.140, named "Pasadena"
to the tables for the WAN interface named "LosAngeles" on the TSR card in slot
3.
to the tables for the WAN interface named "LosAngeles" on the TSR card in slot
3.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{"name"}
A symbolic name to help remember the purpose of this entry. Maximum of 7 characters and
must be enclosed in quotes.
must be enclosed in quotes.
{ip-addr}
The IP address to add to the learned address table for the WAN, in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255.
xxx.xxx.xxx.xxx, where xxx is between 0-255.