Canicom 200 用户手册
CANICOM 200 – User’s guide – May 2009
5/12
Diagram 4
Activate/deactivate the remote control
Remote control is supplied with battery fitted.
▪ Activate: press the On/Off red button ( ) located on the side of the remote control for 1
second (ref. Diagram.1). Indications appear on the LCD screen.
▪ Deactivate: press the On/Off red button ( ) of the remote control for 1 second (ref.
Diagram.1). The LCD screen is off.
To increase the battery life of the remote control, we recommend you to deactivate the unit if you are not
using it for a long period.
Activate/deactivate the receiver collar
A magnet located in the remote control is used to either switch on/off the receiver collar.
▪ Activate: approach the red mark located on the remote control until coming in contact on red mark
located on the receiver collar for 1 second (ref. Diagram 5). The indicator light on the collar will
flash in green indicating that the CANICOM receiver is ready.
▪ Deactivate: approach the red mark located on the remote control until coming in contact on red
mark located on the receiver for 1 second (ref. Diagram 5). The indicator light on the collar will
flash from green to red and then off: the CANICOM receiver is off.
To increase the battery life of the receiver collar, we recommend you to deactivate the unit if you are not
using it for a long period.
Coding of the remote control and receiver collar
Each remote control has its individual radio operator code. The coding of the remote control with the
receiver collar enables to couple your remote control with the receiver collar provided.
Approach until coming in contact those 2
areas during 1 second
REMOTE
CONTROL
RECEIVER
COLLAR
Polarity « - » of the
battery
Seal
Diagram
5