Avaya Bogen PCM Paging Control System 安装指导

[7]

Before setting up your system, use the checklist below to assist you in setting up and programming the PCM
Paging Control System. 

____

Type of Telephone Interface (loop start, ground start, page port, station port) (see System Wiring 
Connections, Section 5)

____

Total Number of Paging Zones (additional Zone Paging Modules or LUPCMADD Paging Control
System Assemblies may be required) (see Installation, Section 3)

____

____

Time-Triggered Signaling (see Sections 11.2 and 11.8):

____

____

____

____    Continuous in Zones Not Being Paged (see Section 7.2)
____    Cease in All Zones During Page (see Sections 7.3 and 7.4)
____    Inhibited in Some Zones (see Section 7.6)
____    Different in Some Zones (see Section 7.5)

____ 

____    Over Ride Capability (see Section 5.7):

____    From Telephone/Loop Start Trunk (see Section 5.2)
____    From External Audio Equipment (see Appendix A)

• 4 pre-assembled modules - PCMTIM, PCMCPU, PCMTBM, and PCMZPM
• Power Supply
• Rack Mount brackets (2)
• Installation and Use Manual
• Screws