Avaya Media Gateway G700 用户手册

Conduct the following manual procedures to update the firmware running on the G700 Media 
Gateway processors and media modules.

This section covers:

●

●

●

●

●

●

Before proceeding with the G700 firmware installation, you should check the /tftpboot directory 
on the TFTP server to make sure the firmware versions match those listed in the planning 
documentation. If they do not, you must copy the correct firmware versions into the /tftpboot 
directory using the following procedure:

1. Download the firmware files from the support Website to your laptop.

2. Using the Web Interface on the S8300 Media Server, copy the firmware files from your 

laptop to the /var/home/ftp/pub directory on the S8300, or

Alternatively, you can "ftp" the files from your laptop to the pub directory.

3. Copy the firmware files from the pub directory to the /tftpboot directory, using the S8300 

Media Server command line interface.

To copy firmware files to the /tftpboot directory of an S8300 Media Server, do the following:

a. Use SSH, Avaya Site Administration, or another tool to access the S8300 Media Server 

command line.

b. Log in as craft.

c. At the Linux prompt, type cd /var/home/ftp/pub, and press Enter.

d. The Linux prompt reappears. The current directory has changed to /var/home/ftp/pub.