Avaya Media Gateway G700 用户手册

In an SSH session to the S8300 (primary controller), access the SAT command line interface to 
complete the following procedures.

1. Type list configuration all and press Enter. 

2. Verify that the software is communicating with all media modules and that all media 

modules are listed in the reports. 

3. Make test telephone calls to verify that Communication Manager is working. 

1. Type change system-parameters maintenance and press Enter. 

2. Ensure that the Start Time and Stop Time fields' administration is the same as before the 

upgrade. 

1. Busy out trunks that were busied out before the upgrade (see 

1. Type newterm and press Enter. 

If you do not get a login prompt and see the following message: 

Warning: Translation corruption detected

 

follow the normal escalation procedure for translation corruption before continuing the 
upgrade. 

1. On the Maintenance Web Interface, under Alarms click Current Alarms to examine the 

alarm log. 

2. If any alarms are listed, click Clear All.

3. Resolve new alarms since the upgrade through Communication Manager using the 

appropriate maintenance reference.