Avanti Telephone 3000 用户手册
Avanti 3015 and Avanti 3000 sets
3
[SPEED DIAL/PROGRAM]
This button is used for speed dialing and for programming
various features.
This button is used for speed dialing and for programming
various features.
[REDIAL/PAUSE]
This buttons lets you automatically redial the last outside
number you dialed, after first accessing an outside line.
This buttons lets you automatically redial the last outside
number you dialed, after first accessing an outside line.
Pressing this button while dialing on an external line inserts
a pause in a dialing sequence.
a pause in a dialing sequence.
[LO HI]
This button adjusts the volume of the speaker, handset,
headset, ringer and background music when any of these
is active.
This button adjusts the volume of the speaker, handset,
headset, ringer and background music when any of these
is active.
[FLASH]
Depending on system programming, this button is used to
disconnect or to send Flash Signal to the connected
remote exchange.
Depending on system programming, this button is used to
disconnect or to send Flash Signal to the connected
remote exchange.
Programmable buttons
The following buttons on your set have already been pro-
grammed to perform specific functions. The System
Administrator can program these buttons to perform other
functions. If the function of certain buttons does not match
those appearing in Figure 1 at the beginning of this guide,
consult your System Administrator.
The following buttons on your set have already been pro-
grammed to perform specific functions. The System
Administrator can program these buttons to perform other
functions. If the function of certain buttons does not match
those appearing in Figure 1 at the beginning of this guide,
consult your System Administrator.
NOTE
With the default configuration, the following fea-
tures are programmed on the four buttons above
the dialpad: [MSG], [DND], [MUTE] and [SPKR].
tures are programmed on the four buttons above
the dialpad: [MSG], [DND], [MUTE] and [SPKR].
3015_3000txt.book Page 3 Wednesday, August 4, 1999 11:13 AM