AudioQuest Audioquest Bulk Cable Spool CAT700 用户手册

If you have any questions or concerns – please call AudioQuest at (949) 585-0111 

or email: info@audioquest.com

2

 

Place boot onto cable. Strip jacket back 0.75”. 

The directionality of the cable flows from Side #1 

to Side #2 along with the arrows and direction 

of the printing. Side #1 is to the left of the razor 

blade, and side #2 is to the right of the boot.

 

Align wires into the formation below. There are 

no stripes on the white wires so carefully keep 

each one in its correct position. The separator 

will be put on later; the illustration below just 

shows the orientation of the wires.

Cut off the drain wires on Side #1 and twist the 

drain wires together on Side #2.

 

Cut out the foil around the twisted pairs of wires.