Atlantis Computer Drive NASF301D 用户手册
DiskMaster
Where solutions begin
ISO 9001:2000 Certified Company
3.1 Troubleshooting
This chapter covers potential problems and the corresponding remedies.
A.1 Using LEDs to Diagnose Problems
The LEDs are useful aides for finding possible problem causes.
A.1.1 Power LED
The PWR LED on the front panel does not light up.
Steps
Corrective Action
1
Make sure that the DiskMaster’s power adaptor is connected
to the device and plugged in to an appropriate power source.
Use only the supplied power adaptor.
to the device and plugged in to an appropriate power source.
Use only the supplied power adaptor.
2
Check that the DiskMaster and the power source are both
turned on and the device is receiving sufficient power.
turned on and the device is receiving sufficient power.
3
Check the power jack and verify.
4
If the error persists, you may have a hardware problem. In this
case, you should contact your vendor.
case, you should contact your vendor.
A.1.2 LED Link
The LAN LED on the front panel does not light up.
The LAN LED on the front panel does not light up.
Steps
Corrective Action
1
Check the Ethernet cable connections between the
DiskMaster and the computer or hub.
DiskMaster and the computer or hub.
2
Check for faulty Ethernet cables.
3
Make sure your computer’s Ethernet card is working properly.
4
If these steps fail to correct the problem, contact your local
distributor for assistance.
distributor for assistance.