ArtDio IPE 1000 用户手册

Using the System Console Interface or Telnet on the Slave Device

Step 1: Enter Privileged Mode

PBX GATEWAY>enable

Password: ******

PBX GATEWAY#

Step 2: Enter Routing Mode

PBX GATEWAY#routing

PBX GATEWAY (routing)#

Step 3: Configure this device as the master gateway

Command: PBX GATEWAY (routing)#master_ip 211.21.40.180

PBX GATEWAY (routing)#

Step 4: Configure the group ID that is used for the entire group

Command: PBX GATEWAY(routing)#group_id <the group ID for the whole group, same

value for master and slaves in the same group>

PBX GATEWAY(routing)#group_id 2000

System need to restart

PBX GATEWAY(routing)#

Step 5: Go back to Privileged Mode

PBX GATEWAY (routing)#exit

PBX GATEWAY#

Step 6: Restart the system for the new settings to take effect. After the restart command is issued, the

system will prompt for a confirmation.

PBX GATEWAY#restart

This command restarts the system. The system will now restart operation code

agent.

Reset system, [Y]es or [N]o? Yes

Step 7: Configuring the prefix for the gateway