ArtDio IPE 1000 用户手册

 

 47

Cut 
Through 

While access the FXO ports, in 
order to dial out directly bypass to 
the FXS ports of this device without 
listen to the Greeting Message that 
recorded in the device, then press 
this Access Code. (FXO to FXS) 

RW [0~9,*,#][0~9], 

example 
"*12345" 
(Default is 
Blank) 

Softkey 
Access 

Define the Access Code to trigger 
the soft-key defined for each 
channel manually 

RW [0~9,*,#][0~9], 

example 
"*12345" 
(Default is 
empty) 

Circuit 
Connect 

Define the Access Code for logical 
circuit-connect dialing. With this 
access code plus the prefix and 
port number, the port that start this 
circuit connect action will 
connected to the remote port 
similar that there are circuit 
between. 

RW [0~9,*,#][0~9], 

example 
"*12345" 
(Default is 
empty) 

MGCP 

Define the Access Code to make a 
call to remote MGCP registered 
entries. Example: *2 is the MGCP 
access code, 30002300 is the 
number of entry that registered in 
Call Agent. Dial "*2" first, after 
hearing the dial tone, dial 
"30002300" user can hear the ring 
back tone that connecting to this 
entry. 

RW [0~9,*,#][0~9], 

example 
"*12345" 
(Default is 
empty) 

Prefix 

Define the prefix that whenever 
dial out from FXO port, it is useful 
for connecting under the lines of 
PBX 

RW [0~9,*,#][0~9][P

13

], example 

"9P" 
(Default is 
empty) 

 

                                                      

13

 "P" in large capital means pause for one second, while connecting the voice gateway to extension lines of PBX, it will take seconds for PBX 

to find an available PSTN connection for you. User can apply multiple "P" if user wants take pause for more than one second.