Ariston Coffee and Cappuccino Maker MCKA103X 用户手册
17
GB
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
REMEDY
•
The water tank is empty or positioned
incorrectly.
incorrectly.
•
Fill the tank with water and/or insert it
correctly, pushing it as far as it will go.
correctly, pushing it as far as it will go.
GROUND TOO FINE ADJUST MILL!
INSERT WATER SPOUT!
press OK
INSERT WATER SPOUT!
press OK
•
The grinding is too fine and the coffee
is delivered too slowly.
is delivered too slowly.
•
Turn the grinding adjustment knob one
click clockwise towards "7".
click clockwise towards "7".
EMPTY GROUNDS CONTAINER!
•
The grounds container (A4) is too full
or more than 3 days have passed since
you last made coffee (this guarantees
correct hygiene of the machine).
or more than 3 days have passed since
you last made coffee (this guarantees
correct hygiene of the machine).
•
Empty the grounds container and
clean, then replace.
Important: when removing the drip
tray, the grounds container MUST be
emptied, even if it is not completely full.
If this is not done, when you make the
next coffees, the grounds container
may fill up more than expected and
clog the machine.
clean, then replace.
Important: when removing the drip
tray, the grounds container MUST be
emptied, even if it is not completely full.
If this is not done, when you make the
next coffees, the grounds container
may fill up more than expected and
clog the machine.
GROUND TOO FINE ADJUST MILL!
(alternating with)
press OK
(then)
FILL TANK !
(alternating with)
press OK
(then)
FILL TANK !
•
The tank has been removed during de-
livery.
livery.
•
There is air in the hydraulic circuit.
•
Insert the tank and press the OK icon
(B9). "HOT WATER" is displayed. Hot
water is delivered and the appliance is
once again ready for use.
(B9). "HOT WATER" is displayed. Hot
water is delivered and the appliance is
once again ready for use.
INSERT GROUNDS CONTAINER!
•
After cleaning, the grounds container
has not been replaced.
has not been replaced.
•
Open the service door and insert the
grounds container.
grounds container.
INSERT INFUSER ASSEMBLY!
•
The brewing unit has not been repla-
ced after cleaning.
ced after cleaning.
•
Insert the brewing unit as described in
the section "Cleaning the brewing unit".
the section "Cleaning the brewing unit".
CLOSE DOOR !
•
The service door is open.
•
Close the service door.
FILL BEANS CONTAINER!
•
The coffee beans have run out.
•
Fill bean container
GENERAL ALARM!
•
The inside of the appliance is very dirty.
•
Clean the inside of the appliance tho-
roughly, as described in the section
"Cleaning and maintenance".
If the message is still displayed after
cleaning, contact a customer services.
roughly, as described in the section
"Cleaning and maintenance".
If the message is still displayed after
cleaning, contact a customer services.
DESCALE!
(alternating with)
MEDIUM CUP STANDARD TASTE
(alternating with)
MEDIUM CUP STANDARD TASTE
•
The machine must be descaled.
•
The descaling procedure described in
the "Descaling" section needs to be per-
formed as soon as possible.
formed as soon as possible.
LESS COFFEE !
•
Too much coffee has been used.
•
Select a milder taste or reduce the
quantity of pre-ground coffee, then
make the coffee again.
quantity of pre-ground coffee, then
make the coffee again.
ADD PRE-GROUND COFFEE!
•
The "pre-ground coffee" function has
been selected without placing any pre-
ground coffee in the funnel.
been selected without placing any pre-
ground coffee in the funnel.
•
The funnel (A21) is blocked.
•
Extract the appliance and place pre-
ground coffee in the funnel.
ground coffee in the funnel.
•
Empty the funnel with the help of a
knife as described in the section "Clea-
ning the pre-ground coffee funnel".
knife as described in the section "Clea-
ning the pre-ground coffee funnel".