Ariens 946101-ST622 用户手册

GB - 16

1. Spark plug wire disconnected.
2. Engine not primed
3. Fuel tank empty.
4. Throttle control lever not in 

correct position.

5. Engine is flooded.

6. Defective or incorrectly gapped 

spark plug.

7. Stale or contaminated gasoline.

8. Engine cooling system 

overloaded with debris.

9. Dirty carburetor or fuel line.

10.Dirty air filter or precleaner.

11. Carburetor out of adjustment.

1. Connect spark plug wire.
2. Prime engine.
3. Add fuel to the fuel tank.
4. See Engine Manual.

5. Wait several minutes before 

attempting to start.

6. Replace or regap spark plug.

7. Drain fuel tank and refill with 

fresh gasoline.

8. Clean debris screen and 

cooling fins.

9. Clean carburetor or fuel line. 

See Engine Manual.

10.Replace air filter or 

precleaner.

11. See Engine Manual or 

contact your dealer.

1. Engine cooling system 

overloaded with debris.

2. Carburetor out of adjustment.

1. Clean engine screen and 

cooling fins.

2. See Engine Manual or 

contact your dealer.

1. Engine not set at Fast speed.

1. Set engine throttle to Fast 

position.

1. Cutter line lengths are too 

uneven.

2. Loose hardware.

1. Trim or adjust cutter line to 

equal lengths. Replace if 
necessary.

2. Check all bolts and nuts, 

including engine mounting 
hardware, for tightness.