American Standard ALTO 70145A 11/00 用户手册

DANGER means:

Severe bodily injury or death can occur to you or other personnel if the DAN-

GER statements found on this machine or in this Owner's Manual are ignored
or are not adhered to.  Read and observe all DANGER statements found in
this Owner's Manual and on your machine.

WARNING means:

Injury can occur to you or to other personnel if the WARNING statements

found on your machine or in this Owner's Manual are ignored or are not
adhered to.  Read and observe all WARNING statements found in this Owner's
Manual and on your machine.

CAUTION means:

Damage can occur to the machine or to other property if the CAUTION

statements found on your machine or in this Owner's Manual are ignored or are
not adhered to.  Read and observe all CAUTION statements found in this
Owner's Manual and on your machine.

Read the operator's manual before servicing or operating this machine.  The manual
contains information essential to the safe and reliable use of this machine.

DANGER:

Sanding/finishing wood floors can create conditions that could produce a fire or explosion.
Follow these precautions:

•

Do not sand over exposed nails.  The grindings may enter the dust bag and ignite the
contents.  Set all exposed nails before sanding.

•

Do not sand over sanding abrasive particles or embedded stones.  The grindings may
enter the dust bag and ignite the contents.  Remove particles or stones before sanding.

•

Do not leave wood dust in bag.  The contents may spontaneously ignite or explode.
Dispose in a metal container clear of any combustibles.  Do not dispose in a fire.

•

Do not use this machine with or near flammable fuels or agents. Read the manufacturer's
label on all chemicals to determine flammability.  Vapors or airborne wood dust can
create an explosive environment.  Open flames, electrical sparks or other sources of
ignition should be extinguish or avoided.  Do not over fill the dust bag.  Ventilate the work
area.

•

Do not operate the machine on an electrical circuit that repeatedly trips or blows the
fuse.  The circuit may be undersized or faulty which could cause an electrical fire.

This machine operate on electric power.  The power is sufficient to cause shock  or
electrocution.  Follow these precautions:

• Do not connect the machine to an electrical circuit that has no grounding conductor.

The grounding conductor will drain the power from the machine, should it become
electrified.  Consult an electrician if the grounding conductor is missing or you suspect
the circuit has no grounding conductor.  Do not remove or disable the grounding conduc-
tor on the electrical cord.  For added protection, use machine on a circuit equipped with
a ground fault circuit interrupter.

• Do not service the machine while connected to an electrical circuit.  Doing so might

result in contact with electrical components.

• Do not use the machine with a damaged electrical cord.  Inspect the cord for damage to

the jacket and connector(s) before connecting the machine to an electrical circuit.  Do
not use the cord to move the machine.  Keep the cord clear of the sanding drum.  Lift
the cord over the machine when moving it from one side to the other.

• Do not expose this machine to rain or moisture.  Damage to electrical components may

occur.  Store in a dry building.