AMANO HandPunch 1000 安装指导

HandPunch 1000 Installation and Operation Manual

Page 6

Revision 1.2

The HandPunch uses low-level infrared light, optics, and a CCD (IC chip) camera to 
capture a three-dimensional image of the hand. Using advanced microprocessor 
technology, the HandPunch converts the image to an electronic template. It stores the 
template in a database with the user’s ID number.

To gain punch, the user enters his or her ID number at the HandPunch’s keypad or uses 
an external card reader. The HandPunch prompts the user to place his or her hand on 
the HandPunch’s platen

1

. The HandPunch compares the hand on the platen with the 

user’s unique template. If the images match, the HandPunch records the transaction for 
processing.

The HandPunch is a time and attendance terminal designed for use with time and 
attendance software. Refer to Figure 1-1 on page 7 when reviewing the information in 
this section.

The HandPunch has an integrated keypad for ID entry (see Figure 1-1). The 

 and 

 keys are used for data entry and programming.

Four different features assist the user with hand placement and read verification.

1. A light emitting diode (LED) hand placement display on the HandPunch’s top 

panel assists users with hand placement on the platen.

2. A liquid crystal display (LCD) shows operational data and programming menus.
3. “Red light/Green light” verification LEDs quickly inform users if their verification 

attempts were rejected or accepted.

4. An internal beeper provides audible feedback during keypad data entry and user 

verification.

1. The Platen is the flat surface at the base of the HandPunch (see Figure 1-1). This is where users 

place their hands for enrollment and verification. It has guide pins to assist positioning the 
fingers during use.