Altec Lansing SDP-950DXA 用户手册
SDP-950
Page
16
PO
TAT
E
TXT
/IM
G
Digit
al P
rese
nter
SDP
-950
DXA
AF
FREE
ZE
IRIS
INT/E
XT
EXT
1
EXT
2
LAM
P
AW
C
ZO
OM
Connect to the USB port on your PC,
then install the supplied SDP-950 Series program.
then install the supplied SDP-950 Series program.
Connect the cable to the
RS-232C terminal on your PC.
RS-232C terminal on your PC.
Digital Presenter
Digital Presenter
RS-232C cable is not provided with the presenter.
You can obtain one from your computer dealer.
You can obtain one from your computer dealer.
We recommend you to connect to USB port which is attached on computer main board.
(It can make troubles in extended front-side USB port or USB hub without power in
accordance with computers.) Be sure to use the USB cable shorter than 5.0 m.
(It can make troubles in extended front-side USB port or USB hub without power in
accordance with computers.) Be sure to use the USB cable shorter than 5.0 m.
Caution
Connecting to output device
Connecting Computer
USB connection
RS-232C connection
Connect a desktop PC and the presenter using USB
cable and install the supplied program. You can see
the projected image on the PC monitor and control the
image using the program.
RS-232C connection is available for advanced user.
If you connect a PC with RS-232C cable, you should
set up your PC and make your own program to control
the projected image on PC. Ask your dealer for further
details.
cable and install the supplied program. You can see
the projected image on the PC monitor and control the
image using the program.
RS-232C connection is available for advanced user.
If you connect a PC with RS-232C cable, you should
set up your PC and make your own program to control
the projected image on PC. Ask your dealer for further
details.