Allen & Heath r16 用户手册
Allen & Heath 18 ZED-R16 User Guide
STEREO INPUT CHANNEL
2
1
ST1 (& ST2) Phono & Jack sockets
Standard RCA phono sockets and 1/4” jack sockets for unbalanced stereo
inputs. The RCA phono sockets normally connect through the jack break
contacts so giving a choice of which connector type to use. The left signal
does not connect to the right if nothing is plugged into the right socket
though, as with some of our other products. If inputs are plugged into the
jack sockets, the RCA phonos will be disconnected.
inputs. The RCA phono sockets normally connect through the jack break
contacts so giving a choice of which connector type to use. The left signal
does not connect to the right if nothing is plugged into the right socket
though, as with some of our other products. If inputs are plugged into the
jack sockets, the RCA phonos will be disconnected.
3
10
-30
-20
-5
0
5
-10
ST1
LEV
O
O
-15
+15
HF
12k
-15
LF
+15
80Hz
ST1
ST1 L
ST1 R
L
R
ST1 (& ST2) Level
The input level control varies the level of the signal from off (fully attenu-
ated) to +10dB of gain at the maximum position.
ated) to +10dB of gain at the maximum position.
10.00 Hz
100.00
1000.00
10000.00
30000.00
-20.00
-15.00
-10.00
-5.00
0.00
5.00
10.00
15.00
20.00
dBr
ZEDR 16 Stereo Input EQ
STEREO Channel EQ
The EQ on the stereo Channel is 2 band shelving equaliser with fixed cor-
ner frequencies of 12kHz and 60 Hz.
ner frequencies of 12kHz and 60 Hz.
1
2
3