Allen & Heath ZED 12 FX 用户手册

下载
页码 36
 
Allen & Heath                                                                      14                                            ZED-12FX & 22FX User Guide 
MONO INPUT CHANNEL 
Mic Input Socket 
Standard 3-Pin XLR socket wired as Pin 1=Chassis, Pin 2=hot 
(+), Pin 3=Cold (-).  
Line Input Jack Socket 
Standard 1/4” (6.25mm) Jack socket for balanced or unbalanced line 
level signals. Wired Tip=Hot(+),  Ring=cold (-), Sleeve=Chassis. 
The  Line  input  overrides  the  Mic  input,  so  if  you  want  to  hear 
something  plugged  in  to  the  xlr  socket,  make  sure  nothing  is 
plugged into the Line input. 
Insert Jack Socket 
Standard 1/4” (6.25mm) Jack socket for unbalanced insert send and 
return  signals.  Wired  Tip=send,  Ring=return,  Sleeve=Chassis. 
Nominal level is 0dBu. The insert point is after the 100Hz filter and 
before the EQ. 
Gain Control 
This adjusts the gain of the input amplifier to match the signal level 
of  the  input.  The  gain  is  varied  from  –6dB  (attenuation)  to  +63dB 
for  signals  plugged  in  to  the  xlr  socket  (Mic  Input)  and  –10dB  to 
+26dB for signals plugged into the Line input jack. 
100Hz Hi-pass Filter 
The Hi-pass filter is used for reducing pop noise and rum-
ble from microphone signals. It is a 2-pole (12dB per oc-
tave) filter with a corner frequency set at 100Hz. 
The filter affects signals from both Mic XLR and Line jack 
socket.    
10.00 Hz
100.00
1000.00
10000.00
30000.00
-50.00
-40.00
-30.00
-20.00
-10.00
0.00
10.00
dBr
INSERT
1
LINE
MIC
-6
-10
63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz