Allen & Heath 1D 用户手册

 

Allen & Heath 

13 

XONE:1D User Guide 

MIDI Channel Number 
The MIDI channel number will default to channel 16, but can be 

changed to any channel between 1 and 16. 
To change the MIDI channel number and MIDI map: 
1. 

Connect the USB cable to the PC/Mac but not the Xone:1D 

2. 

Hold down the switch on the encoder shown in the diagram 

3. 

Connect the USB cable to the Xone:1D 

4. 

The illuminated switches will flash three times—now release 

the switch on the encoder 

The illuminated switches on the Xone:1D will display the current 

MIDI channel number in binary format as shown below. 

Channel 1 

Channel 2 

Channel 3 

Channel 4 

Channel 5 

Channel 6 

Channel 7 

Channel 8 

Channel 9 

Channel 10 

Channel 11 

Channel 12 

Channel 13 

Channel 14 

Channel 15 

Channel 16 

To change the channel number that the MIDI is transmitted on, rotate the encoder above 

the jog wheel.   
Once the desired channel has been selected, press and then release the switch on the 

encoder above the jog wheel, the illuminated switches will flash once indicating that the 

channel number has been set.