Aleratec 240147 用户手册
www.aleratec.com
5
Introduction
Unpacking your Shredder
1. Remove all packing materials from the shredder.
2. Mount the 4 wheels at the bottom of the main body.
3. Place the shredder on a flat level surface.
4. Place shredder motor on top of the main body.
5. Slide basket in under shredder motor.
2. Mount the 4 wheels at the bottom of the main body.
3. Place the shredder on a flat level surface.
4. Place shredder motor on top of the main body.
5. Slide basket in under shredder motor.
Note: DVD/CD Shredder DS18 will operate only when
the basket is properly in place.
Powering Up your Shredder
1. Plug the shredder into a 120V electrical outlet.
2. Place the slide switch in the AUTO position.
3. The power LED will illuminate and the shredder is now ready for
2. Place the slide switch in the AUTO position.
3. The power LED will illuminate and the shredder is now ready for
operation.