Alesis Hammerfall DSP System 用户手册
62
User's Guide HDSP MADI
© RME
When Full LC Display Support is turned off, only a brief information about the first fader of the
block (channel and row) is sent. This brief information is also available on the LED display of
the Behringer BCF2000.
Tip for Mac OS X users: LC Xview (
block (channel and row) is sent. This brief information is also available on the LED display of
the Behringer BCF2000.
Tip for Mac OS X users: LC Xview (
www.opuslocus.com
) provides an on-screen display
emulating the hardware displays of a Logic/Mackie Control, for use with controllers that can
emulate a Logic/Mackie Control but do not have a display. Examples include the Behringer
BCF2000 and Edirol PCR series.
Deactivate MIDI in Background (menu Options) disables the MIDI control as soon as another
application is in the focus, or in case TotalMix has been minimized. This way the hardware con-
troller will control the main DAW application only, except when TotalMix is in the foreground.
Often the DAW application can be set to become inactive in background too, so that MIDI con-
trol is switched between TotalMix and the application automatically when switching between
both applications.
TotalMix also supports the 9th fader of the Mackie Control. This fader (labeled Master) will con-
trol the stereo output faders (lowest row) which are set up as Main Monitor outputs in the Moni-
tor panel. Always and only.
emulate a Logic/Mackie Control but do not have a display. Examples include the Behringer
BCF2000 and Edirol PCR series.
Deactivate MIDI in Background (menu Options) disables the MIDI control as soon as another
application is in the focus, or in case TotalMix has been minimized. This way the hardware con-
troller will control the main DAW application only, except when TotalMix is in the foreground.
Often the DAW application can be set to become inactive in background too, so that MIDI con-
trol is switched between TotalMix and the application automatically when switching between
both applications.
TotalMix also supports the 9th fader of the Mackie Control. This fader (labeled Master) will con-
trol the stereo output faders (lowest row) which are set up as Main Monitor outputs in the Moni-
tor panel. Always and only.
27.4 Mapping
TotalMix supports the following Mackie Control surface elements*:
Element:
Meaning in TotalMix:
Channel faders 1 – 8
volume
Master
fader
Main
Monitor
channel's
faders
SEL(1-8) + DYNAMICS
reset fader to Unity Gain
V-Pots
1
–
8
pan
pressing V-Pot knobs
pan = center
CHANNEL LEFT or REWIND
move one channel left
CHANNEL RIGHT or FAST FORWARD
move one channel right
BANK LEFT or ARROW LEFT
move eight channels left
BANK RIGHT or ARROW RIGHT
move eight channels right
ARROW UP or Assignable1/PAGE+
move one row up
ARROW DOWN or Assignable2/PAGE-
move one row down
EQ
Master Mute
PLUGINS/INSERT
Master
Solo
STOP
Dim Main Monitor
PLAY
Talkback
PAN
Mono
Main
Monitor
MUTE Ch. 1 – 8
Mute
SOLO Ch. 1 – 8
Solo
SELECT Ch. 1 – 8
Select
REC Ch. 1 – 8
in Submix mode only: select output bus
F1 - F8
load preset 1 - 8
F9
select Main Monitor
F10 - F12
Monitor Phones 1 - 3
*Tested with Behringer BCF2000 Firmware v1.07 in Mackie Control emulation for Steinberg mode and with Mackie
Control under Mac OS X.
Control under Mac OS X.