Alfa Romeo 147 业主指南

POWER STEERING FLUID 
(

fig. 10-11)

Check that the level of the oil in the reser-

voir is at maximum. 

This operation should be carried out with

the car on a level surface and the engine
switched off and cold. 

Check that the level reaches the 

mark on the reservoir or coincides with the
upper notch (maximum level) on the dip-
stick (

A) integral with the reservoir cap.

fig. 10 - T.SPARK versions

A0A0216m

ENGINE COOLANT FLUID 
(

fig. 9)

The level of the coolant in the header tank

(reservoir) should be checked with the en-
gine cold and the car on a level surface and
it should be between the 

MIN and MAX

marks on the tank. 

fig. 9

A0A0240m

If the level is low, loosen the header tank

cap (

A) and slowly pour through the filler

the fluid specified in the “Fluids and Lubri-
cants” table in the “Technical Specifications”
chapter until nearing the 

MAX mark; for

this operations contact Alfa Romeo Autho-
rised Services. 

The antifreeze mixture contained in the

cooling circuit guarantees protection down
to –40°C.

For particularly hard climate conditions, we

recommend use of a 60% 

and 40% demineralized water mixture.

234-257_Alfa147 Q2 GB  4-07-2008  12:05  Pagina 243