Alfa Romeo 147 业主指南

Regularly check that the spray jets are in-

tact and clean (

fig. 22).

If it is necessary to direct the jet, contact

an Alfa Romeo Authorised Service.

The main causes of corrosion are: 

– atmospheric pollution 

– salty air and humidity (coastal areas, or

hot humid climates) 

– seasonal environment conditions. 

Not to be underestimated is also the abra-

sive action of wind-borne atmospheric dust
and sand and mud and gravel raised by oth-
er cars. 

On your 

Alfa 147, Alfa Romeo has

implemented the best manufacturing tech-
nologies to effectively protect the bodywork
against corrosion.

fig. 22

A0A1013m

These include: 

– Painting products and systems which

give the car particular resistance to corrosion
and abrasion. 

– Use of galvanised (or pretreated) steel

sheets, with high resistance to corrosion. 

– Spraying of the underbody, engine com-

partment, wheel arches and other parts with
highly protective wax products. 

– Spraying of plastic parts, with a protec-

tive function, in the more exposed points:
underdoor, inner wheel arch linings, etc. 

– Use of “open” boxed sections to pre-

vent condensation and pockets of moisture
from triggering rust inside. 

The

Alfa 147 is guaranteed against

perforation due to rust of any original ele-
ment of the structure or body. For the gen-
eral terms of this warranty, refer to the War-
ranty booklet.

234-257_Alfa147 Q2 GB  4-07-2008  12:05  Pagina 254