Alfa Romeo 147 业主指南

(fig. 61)

The headlights are flashed pulling the lever

towards the steering wheel (instable posi-
tion) regardless of the position of the
knurled ring. The 

1 warning light on the

cluster will come on at the same time.

IMPORTANT Only the main-beam lights

are flashed. To avoid penalties follow local
regulations.

(fig. 62)

Regardless of the position of the knurled

ring, moving the lever to the stable position
will:

up, position (

1) - engage the right-hand

direction indicators.

down, position (

2) - engage the left-hand

direction indicators.

When the dipped beam headlights and the

fog lamps are switched on, the outer light
control unit (integrated in the Body Com-
puter) works according to the following log-
ics:

– turning on the main beams, the dipped

beams turn off while the fog lamps stay on,
when restoring the starting condition at
dipped beam setting;

or

– turning on the main beams, the fog

lamps turn off and then turn on again au-
tomatically as the main beams are switched
off.

Therefore, in the event of Body Comput-

er replacement, the outer light operating log-
ic may be different.

fig. 61

A0A0067m

fig. 62

A0A0068m

One of the warning lights (

R or E) will

come on on the instrument cluster at the
same time.

The lever is returned to its position auto-

matically and the indicators are switched off
when the steering wheel is straightened.

IMPORTANT If you wish to signal a

rapid change of direction involving only a
minimal movement of the steering wheel,
the lever can be removed up or down with-
out it clicking (unstable position). When re-
leased, the lever will return to its home po-
sition.

fig. 63

A0A0067m

001-057 Alfa 147 Q2 GB  4-07-2008  11:58  Pagina 45