Agilent Technologies Microwave Oven 53150A 用户手册
Appendix A Rack Mounting the Counter
Rack Mounting the Counter
A-2
Operating Guide
A
Rack Mounting the Counter
You can mount the Counter in a standard 19-inch cabinet using one of two
optional kits available from Agilent:
optional kits available from Agilent:
•
Option 1CM Rack Mount Kit (Agilent 53150-67001 Rack Adapter Kit)
for single instrument (Half Module) rack mounting. Instructions and
mounting hardware are included with the rack-mounting kit.
for single instrument (Half Module) rack mounting. Instructions and
mounting hardware are included with the rack-mounting kit.
•
Agilent 5061-9694 Lock Link Kit for two-instrument, side-by-side rack
mounting. Instructions and mounting hardware are included with the
rack-mounting kit. (Two Option 1CM Rack Mount Kits are also
required when mounting two instruments.)
mounting. Instructions and mounting hardware are included with the
rack-mounting kit. (Two Option 1CM Rack Mount Kits are also
required when mounting two instruments.)
To rack-mount the Counter, you must first remove the front and rear
rubber bumpers, the carrying handle, and the handle pivots:
rubber bumpers, the carrying handle, and the handle pivots:
NOTE
Unlike the hardware used elsewhere in this instrument, all hardware
used to attach the rack mounts and the handle pivots is metric.
used to attach the rack mounts and the handle pivots is metric.
1
Rotate the handle to its vertical position, pull the ends outward, and set
it aside.
it aside.
2
To remove the rubber bumpers, lift the center of the top of the bumper
upward, stretch a corner of the bumper diagonally, then slide it off the end
of the Counter.
upward, stretch a corner of the bumper diagonally, then slide it off the end
of the Counter.