ACR Electronics ZE-NES14 用户手册

42

1.  Before installation, please make sure proper connections are conducted and the unit 

operates normally. lmproper connection may result in damage to the unit.

2.  Use only accessories designed and manufactured for this unit and other unauthorized 

accessories may result in damage to the unit.

3.  Before installation, please fasten all power cables.

4.  DO  NOT  install  the  unit  in  the  place  where  close  to  hot  area  to  prevent  damage  to 

electrical components such as the laser head.

5.  lnstall the unit horizontally. lnstalling the unit more than 30 degree inclined may result in 

worse performance.

6.  To prevent electric spark, connect the positive pole first and then the negative pole.

7.  DO NOT block the cooling fan exit to ensure sufficient heat dissipation of this unit, or it 

may result in damage to this unit.

UNIT INSTALLATION 
Method A

1.   lnsert mounting bracket into dash board, choose appropriate mounting tab according 

to  the  gap  width,  bending  the  mounting  tab  outwards  with  a  screw  driver  to  fix  the 
mounting bracket in place.

2.  Use 2 pieces of M5 x 5 cone shaped screw to fix two assemble bars on both sides of 

the unit (see picture 1).

 

 

(Picture 1)

3.  Screw in 1 piece of M5 x 24 to the hole of the unit back and put on a rubber sheath over 

the screw (see picture 2).