Digimerge DHU104 用户手册
59
Appendix 9: System Setup Tips
3. Select the DATE AND TIME Menu. Change the settings by navigating with the UP/
DOWN/LEFT and RIGHT arrow keys. Set the following based on your local Time (and
Timezone), and set the current date for the
system.
Timezone), and set the current date for the
system.
• Date/Time - Sets the current system Date
and Time.*
• Date Format - Sets the Date Display
format (MM-DD-YYYY, YYYY-MM-DD,
etc.).
etc.).
• Time Format - Sets the Time Display
format to either 12 or 24 hour display.
• Network Time Server Setup -
Synchronizes the system to the specified
remote time server. Select the SYNC
button to connect to the remote server and
synchronize the time. (may also use a time
server of the users choice).
remote time server. Select the SYNC
button to connect to the remote server and
synchronize the time. (may also use a time
server of the users choice).
• Timezone Setup - Selections for the local Time Zone (i.e. EST, CST, PST). The DST
(Daylight Savings Time) can be set to ON/OFF.
* NOTE: If the Date/Time is set into the past, a message will appear warning that
Overlapped date(s) will be erased.
** MAKE SURE THAT THE DATE AND TIME ARE SET PRIOR TO RECORDING! **
Overlapped date(s) will be erased.
** MAKE SURE THAT THE DATE AND TIME ARE SET PRIOR TO RECORDING! **