Digidesign Control 24 用户手册

To enable Record Safe status on a channel strip:

1  

Press the RECORD SAFE switch. Its LED will 

flash.

2  

Press the REC ARM switch on any channels 

you would like to place in Record Safe mode.

3  

Press REC SAFE again. Its LED will light solid, 

indicating that one or more tracks are in Record 
Safe mode.

4  

Repeat the process to disengage any tracks 

from Record Safe mode.

Display of Safe Mode

The respective REC SAFE or SOLO SAFE switches 
will light if any track is in Record Safe or Solo 
Safe mode. 

Pro Tools shows the safe status on-screen by 
graying out the Solo or Record switches in the 
Mix and Edit windows.

Shortcuts

◆

APPLY TO ALL CHANNELS+SOLO on any 

channel clears or enables Solo on all channels.

The SELECT Switch

The SELECT switches select channels for group-
ing, deletion and all other channel-related func-
tions that do not have dedicated controls on the 
channel strip. 

For example, you do not need to select a chan-
nel in order to solo or mute it. Just press its 
SOLO or MUTE switch. 

However, for any function that uses a set of con-
trols not found in the channel strip such as in-
put/output routing and other Assign functions, 
or whenever you want to apply a certain func-
tion to multiple channels, the SELECT switch in-
cludes or excludes channels from the operation.

The SELECT switches are additive, or latching, 
enabling the quick selection of several channels 
without the need for any key strokes.

To select a single channel:

■

Press the SELECT; the green LED illuminates 

when active. 

SELECT Switch Shortcuts

◆

Press APPLY TO ALL+SELECT to select or dese-

lect all channels (including off-bank channels). 

◆

While pressing the 

(CTL) switch, press any 

SELECT switch to change the SELECT status of 
that channel strip, and change all other channel 
strips to the opposite state.