Desa Compact 150 Watt Motion Sensing Halogen 5511 用户手册

;;;;;

;;;;;

;;;;;

;;;;;

Model 5511

The Motion Sensor Quartz Security Light turns on 150 
watts of quartz-halogen lighting when motion is detected 
and then, after a selectable period of time, automati-
cally turns the lighting off. The built-in photocell keeps 
the lighting off during daylight hours.

3 Wire 

Connectors

4 Screws

(2 sizes)

Light Fixture

Cover Plate 

Gasket

© 2007 DESA Specialty Products™ 

598-1310-00

Halogen

Bulb

* resets to Auto Mode at dawn.

ON-TIME

ON-TIME

•  The Light Control requires 120-volts AC. Do not con-

nect through a dimmer or other electronic switch.

•  If you want to use Manual Mode, the control must be 

wired through a switch.

•  Some codes require installation by a qualifi ed 

•  This product is intended for use with the enclosed 

gasket and with a junction box marked for use in wet 
locations.

•  The backplate has knockouts so the sensor can be 

mounted on most junction boxes.

•  In some applications a universal adaptor plate may 

be needed. Adaptors are available at Home Centers 
and Electrical Supply Stores.

*  If you get confused while switching modes, turn the 

power off for one minute, then back on. After the 
calibration time (1

1

/

2

 min.) the control will be in the 

AUTO mode.

10 5 1 TEST

10 5 1 TEST

MANUAL MODE

AUTO

TEST

... back on.

1 Second OFF 

then...

Manual mode only works at night 
because daylight returns the sensor 
to AUTO.

Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.

Manual mode works only with the 
ON-TIME switch in the 1, 5, or 10 
position.

This package includes:

Note:   When fi rst turned on wait about 1

1

/

2

 minutes for 

the circuitry to calibrate.

Put the ON-TIME switch in the 1, 5, 
or 10 minute position.

Put the ON-TIME switch on the bottom 
of the sensor in the TEST position.

Mode:

On-Time

Works:

Day Night

5 Seconds

x

x

1, 5, or 10 Min

x

Until Dawn*

x