Delphi NAV300 用户手册

Delphi NAV300 User’s Guide 

 

- 10 - 

 Warning: To avoid personal injury, follow the safety guidelines and 

installation instructions provided so that the Delphi NAV300 does not obstruct 
the view of the driver, interfere with the operation of any airbags and safety 
features in the vehicle, or become airborne in the case of an accident. Do not 
attempt to install Delphi NAV300 while driving. 

 
Before installing the Delphi NAV300, check whether your vehicle is fitted with a 
heat-reflecting or heated windshield. If so, you will need to purchase an external 
antenna from your retailer to allow your unit to pick up GPS signals. 
 
NOTE: Alternative mounting options may be available for your vehicle make and 
model.  Contact your retailer or Delphi for more information. 
 
NOTE: In the state of California and Minnesota, it is necessary to use the 
dashboard mount, according to state law. 
 
Follow these steps to mount the suction mount to the windshield: 
 

 

 

 

 

 

1.  Flip up the GPS Antenna. 

 

2.  Using the two tabs on the bottom of the cradle, 

locate the Delphi NAV300 and rotate it 
rearward.  While pushing in the two release 
buttons, continue rotation until the unit is firmly 
seated in the cradle. 

 

3.  Release the two grey buttons.  Reverse the 

operation to remove the unit. 

 

4.  Position the suction cup firmly against the 

windshield at the desired location 

 

5.  Flip the lever towards the suction cup.  The 

unit is now secure for operation. 

 

Pull the lever away from the windshield/dashboard mount to remove the suction 
cup. Pull the release tab to release the suction.  If the suction cup does not 
adhere, clean the mounting area of the windshield with a cloth dampened with 
isopropyl alcohol. Let the area dry, then reapply the suction cup. Be sure to 
mount the unit when the windshield is warm – it may be difficult when the 
windshield is cold.