Datalogic Scanning Datalogic Skorpio 产品宣传页

 

 

 

 
 
 
 

 
 
The Datalogic Skorpio™ Serial/Modem Cradle is a battery charger and also functions as a serial 
communication interface between the host computer (RS232) and the RS232 contacts on the Datalogic 
Skorpio™ mobile computer. 
 

 

 
 

 

 

 

Key: 
A) 

Battery recharge and RS232 contacts 

B) 

Power indicator LED 

C) 

Connector for host computer connection (RS232) 

D) 

Power supply connector 

E) Modem 

connector 

 

Data can be transmitted to the Host launching the communication software on the mobile computer and then 
inserting it into the cradle slot. By inserting the mobile computer into the cradle, the mobile computer battery 
charging starts. 

822000731 (Rev. A) 

 
For correct insertion onto the cradle, insert the mobile computer from the top of the cradle and push it down 
firmly. 
 

 

 

To remove the mobile computer from the Datalogic Skorpio™ cradle, simply pull it upwards while holding the 
cradle firmly down. 
 

 

 

Electrical Features 
Power supply * 

9 VDC Min – 30 VDC Max 

Consumption 

12 W Max 

Indicators Power 

LED 

Charge time 

4 Hours (Li ION batteries) 

Communication Features 
Interface RS232 
Baud rate 

9600 - 115200 

Environmental Features 
Working temperature 

0° to +50 °C ** 

Storage temperature 

-20 °C to +60 °C 

Humidity 

90% non condensing 

Degree of protection 

IP20 

Mechanical Features 
Dimensions 

85 x 106 x 90 mm 

Weight 350 

g 

 
* 

Recommended DL power supply: FPS18. 

**  Batteries must be charged at a temperature ranging from 0° to 45 °C. 
 

 

 

 
 

B

A

C

D

E