Datacom Systems VS-1200 用户手册
VS-1200 Data Acccess Switch
16
© 2009 Datacom Systems Inc
3.3.1
Serial DB9
The
SERIAL connector port is a shielded DB9 Female and is cabled to the COM port of any
compatible network tool or PC where HyperTerminal software resides. It is the only port that can
easily connect the Management PC to set the IP address (default 192.168.1.1) for the first time.
easily connect the Management PC to set the IP address (default 192.168.1.1) for the first time.
3.3.2
Power Switch (SFP series)
The front panel
POWER 1, POWER 2 LEDs are illuminated
green
, respectively, when the DC power
switch is depressed
ON and DC power is available at both the two rear DC power sockets. Either
POWER 1, POWER 2 LED illuminated
red
indicates a defective power source and immediate
investigation as to the cause is required to insure redundant power integrity.
3.3.3
Rear Label (BT series)
DB9 nomenclature, Serial Number (SN) identifier, Media Access Control (MAC) address
identifier, input power requirements, certification compliance identifiers and various other information
are provided on this rear label.
identifier, input power requirements, certification compliance identifiers and various other information
are provided on this rear label.
3.3.4
Rear Labeling (SFP series)
Serial Number (SN) identifier, Media Access Control (MAC) address identifier, input power
requirements, certification compliance identifiers and various other information are provided on this
rear label.
requirements, certification compliance identifiers and various other information are provided on this
rear label.
3.3.5
Input Power
Two DC input power sockets are provided on the rear panel. The front panel
POWER 1 and 2
LEDs are illuminated
green
, respectively:
·
(SFP series) - when the DC
POWER switch is depressed ON and DC power is available at
both the two rear DC power sockets; or
·
(BT series) - when DC power is available at both the two rear DC power sockets.
Either
POWER 1 or 2 LED not illuminated when powered, indicates a defective power source and
immediate investigation as to the cause is required to insure redundant power integrity.
Although only one switching AC adapter power supply is required to power the configurable unit,
use of a second independent power source is strongly recommended to assure uninterrupted
monitoring. Furthermore, connecting the second DC input power socket to a different external
power source circuit than the first DC input power source eliminates power as a single point of
failure.
use of a second independent power source is strongly recommended to assure uninterrupted
monitoring. Furthermore, connecting the second DC input power socket to a different external
power source circuit than the first DC input power source eliminates power as a single point of
failure.